Hello from someone who keeps a tape drive in the living room. Let me explain a thing that confuses people who only know disks.
A streaming tape drive moves the tape past the head at a fixed speed. For the data to be written continuously, the computer must keep a steady flow of data coming. If the buffer runs empty, the drive cannot just pause: the tape is physically moving. It has to stop, rewind a little, and position again before it can continue writing at the right spot.
If the host is too slow, this repeats over and over: stop, back up, start, stop, back up. The tape goes back and forth like someone polishing a shoe. That is "shoe-shining", and it wears both tape and heads and makes the backup take many times longer.
Remedies:
- Feed it faster: a bigger block size, a bigger buffer, a faster source.
- Compress or stage the data to a fast disk first so the stream never starves.
- Newer drives can adjust the tape speed to match the data rate (speed matching) so they starve less often.
On Linux you will meet /dev/st0 (rewinds when closed) and /dev/nst0 (does not rewind), and mt -f /dev/nst0 status to ask the drive what it thinks is going on. If you write several archives in a row, use nst0, or each one will overwrite the previous.