A cellular network covers a region with many radio cells, each served by a base station, and hands a moving device from one to the next without dropping the call or the session. It combines radio engineering, a large core network and subscriber identity, and it is built to serve millions of users at once.
Key concepts
- Cells and frequency reuse: the same frequencies are reused in cells far enough apart not to interfere.
- Radio access network: base stations and the air interface, with scheduling of who transmits when.
- Core network: authentication, mobility management, session setup and the gateway to the internet.
- Handover: moving an active connection between cells as the device moves.
- Generations: each generation, from 2G to 5G, changes the air interface, the core and the services it targets.
Vocabulary
- SIM: the card that holds a subscriber's identity and keys.
- Base station: the radio site that talks to devices in a cell.
- Backhaul: the link carrying a base station's traffic to the core.
- Spectrum band: the range of frequencies a carrier is licensed to use.
- Slicing: dividing one physical network into virtual networks with different guarantees.
What to study, in order
- Basic radio and modulation: bandwidth, noise, why capacity is limited.
- The architecture of one generation, end to end: device, radio, core, internet.
- Authentication with the SIM and how a network knows who you are.
- Mobility: registration, paging, handover, and what each costs in signalling.
- Run an open-source core and software radio in a shielded lab, within the law, and watch the messages.