Skip to the content ForoHackers
Log inJoin

Why is the robot's left turn ninety degrees in one direction and eighty-eight going back?

Fault analysisMechatronicsRobotics
#7810 · · Quote · Report

Before anyone makes the robot take a maths GCSE: there's a bit of card taped to the output shaft now. Four same-direction quarter turns bring its point back to the pencil mark, near enough. One quarter turn and one reverse and the thing falls short. On the floor the wheels slip, so this is just on the bench. I have used up my good masking tape in the pursuit of two degrees.

#7965 · · Quote · Report

Leave the power off and gently rock the output either way. Does the pointer move a little before the gears start dragging the motor along with it?

#7966 · · Quote · Report

Yes. Visible dead bit when I change direction. I had been multiplying every turn by 90/88 and I'd like my afternoon back.

#7967 · · Quote · Report

Can offer three feet of masking tape. Marked either 3 feet or 3.07 feet depending which direction you unroll it.

You are not logged in, so this goes up anonymously: no account, no name and no address is stored with it, and it may carry no link and no image. Log in or join to post under your name. Our web server's logs keep the address and time of every request for up to 14 days; to keep yours out of them, use Tor. To reach the staff in confidence, use the drop. Sign as a returning source (a key kept only in this browser)

Sending takes a few seconds here: your browser first works out a proof of work against spam.

Reply