You dumped the flash of your own board and got a raw .bin with no ELF header, no symbols, no load address. Where do you start? With the vector table, which sits at the beginning of the image on a Cortex-M.
First bytes:
00000000: 00 80 00 20 c1 01 00 08 5d 02 00 08 5f 02 00 08
Little-endian words:
- word 0:
0x20008000, the initial stack pointer. It points to the end of RAM, so RAM starts below it (0x20000000region). - word 1:
0x080001C1, the reset handler. The lowest bit is the Thumb bit (always 1 on these cores), so the real code address is0x080001C0. - word 2:
0x0800025D, NMI handler (code at0x0800025C). - word 3:
0x0800025F, HardFault (code at0x0800025E).
Every handler address points into 0x0800xxxx. That tells you the image is mapped at 0x08000000, so file offset 0x1C0 is address 0x080001C0. Load the binary at that base in your disassembler, mark 0x080001C0 as a function in Thumb mode, and the rest unravels from there.
Sanity checks: all code pointers odd and in a consistent range; the stack pointer in a plausible RAM range; many vectors pointing to the same default handler. If instead the first word looks like code, the image probably has a bootloader or header in front, and the table sits at a later offset.
Shape, not offsets, as I say every time.