Skip to the content ForoHackers
Log inJoin

Power electronics: start here

Power electronics
#3015 · · Quote · Report

Power electronics converts and controls electrical energy with switches: chargers, supplies, motor drives, solar inverters. The idea is to switch transistors on and off so fast that little energy is lost as heat, and to filter the result into clean voltage or current.

Key concepts

  • Switching converters: buck, boost and buck-boost regulators move energy through an inductor in pulses.
  • Losses: conduction loss, switching loss and magnetic loss decide efficiency and heat.
  • Control: feedback loops hold the output steady against load and input changes, and must stay stable.
  • Isolation and protection: transformers or optocouplers, fuses, and limits on current, voltage and temperature.

Vocabulary

  • Duty cycle: the fraction of each period a switch is on.
  • MOSFET and IGBT: the usual power switches, for lower and higher voltages respectively.
  • Ripple: the small variation left on the output after filtering.
  • Gate driver: the circuit that switches a power transistor fast and safely.

What to study, in order

  1. Circuit basics, then the inductor and capacitor in steady state.
  2. Simulate a buck converter and see the inductor current and ripple.
  3. Heat: calculate losses and a heatsink, and measure real temperatures.
  4. Feedback control of a converter, with its stability margins.
  5. Layout of fast switching loops, and electromagnetic compatibility.

Safety

Mains voltage and large capacitors can kill. Work on low-voltage supplies while learning; never touch a live circuit or probe the mains side of a supply with grounded equipment unless it is isolated. Capacitors keep their charge after power-off, so discharge them. Where mains work is needed, use an isolation transformer and a current-limited setup, and ask a qualified person.

Related tags

#analog #control-systems #pcb #semiconductors

You are not logged in, so this goes up anonymously: no account, no name and no address is stored with it, and it may carry no link and no image. Log in or join to post under your name. Our web server's logs keep the address and time of every request for up to 14 days; to keep yours out of them, use Tor. To reach the staff in confidence, use the drop. Sign as a returning source (a key kept only in this browser)

Sending takes a few seconds here: your browser first works out a proof of work against spam.

Reply