Mechatronics designs machines in which mechanics, electronics and software are one system: a printer, an anti-lock brake, a camera autofocus. The gain comes from designing the three together, so a sensor, a motor and a control law are chosen as a set rather than bolted on in turn.
Key concepts
- Actuators: DC, stepper and servo motors, solenoids and pneumatics, with their torque, speed and drive electronics.
- Sensors: encoders, limit switches, strain gauges, current and temperature sensors, with signal conditioning.
- Mechanisms: gears, belts, screws and linkages, which convert and limit motion and bring backlash and friction.
- Embedded control: a microcontroller closing the loop in real time.
- System integration: power, wiring, enclosures, and the order in which subsystems are tested.
Vocabulary
- Servo: a motor with feedback that holds a commanded position or speed.
- Stepper: a motor that moves in fixed angular steps.
- Backlash: the play between gear teeth that makes reversing inexact.
- H-bridge: the circuit that drives a motor in both directions.
What to study, in order
- Basic electronics and mechanics: torque, power, gear ratios, Ohm's law.
- Drive a DC motor with an H-bridge and PWM; measure its speed.
- Close a position loop with an encoder and a PID controller.
- Build a small one-axis mechanism, such as a linear slide, and tune it.
- Add limits, a stop button and fault handling before making it faster.
Related tags
#robotics #control-systems #microcontrollers #power-electronics