Saltar al contenido ForoHackers

Drones: start here

Drones
#377 · Ophuscado · · Denunciar

A drone is an uncrewed aircraft, most often a multirotor that hovers on several propellers. It is a flying robot: motors, sensors, a flight controller and a radio link, held up by a control loop that corrects it hundreds of times a second. It teaches control, power and aviation rules at once.

Key concepts

  • Flight dynamics: thrust, weight, torque, and how differing motor speeds roll, pitch and yaw the craft.
  • Flight controller: reads gyroscopes and accelerometers and runs the stabilising control loop.
  • Navigation: satellite positioning, barometer and sensor fusion for position and altitude.
  • Power and payload: battery capacity, motor efficiency and weight set endurance.
  • Failsafes: behaviour on lost radio, low battery or sensor failure, such as hover, land or return.

Vocabulary

  • Multirotor: a drone lifted by several propellers; fixed-wing craft glide on wings.
  • Attitude: orientation in roll, pitch and yaw.
  • ESC: electronic speed controller, the driver of each brushless motor.
  • Telemetry: data sent back from the aircraft to the pilot.

What to study, in order

  1. Basic physics of lift and thrust, and the main parts of a drone.
  2. Fly in a simulator before anything real.
  3. Study the attitude control loop and tune its gains in simulation.
  4. Read the logs of a flight, or a simulated one, and find what the controller was doing.
  5. Learn the rules where you fly, and plan every flight and its failsafes.

Safety and rules

Spinning propellers cut; remove them when working on the bench. Lithium batteries can catch fire, so charge and store them with care. Flight rules differ by country and place: registration, no-fly zones, height limits, privacy and permission to fly near people or airports. Check your local authority before each flight, and never fly where it could endanger others.

Related tags

#robotics #autonomous-systems #control-systems #wireless

Inicia sesión o únete para responder.