Digital design builds circuits out of logic: gates, flip-flops and the state machines made from them. Every processor, controller and interface chip is such a circuit. The central skill is thinking in parallel hardware and in clock cycles, not in sequential statements.
Key concepts
- Combinational logic: outputs depend only on current inputs; Boolean algebra and truth tables describe it.
- Sequential logic: flip-flops and a clock give circuits memory and a notion of step.
- Finite state machines: the usual way to control behaviour, with states, transitions and outputs.
- Timing: setup and hold times, propagation delay and the critical path set the maximum clock.
- Clock domains: signals crossing between clocks need synchronisers or they become unstable.
Vocabulary
- HDL: hardware description language, such as Verilog, SystemVerilog or VHDL.
- RTL: register-transfer level, a design described as registers and the logic between them.
- Metastability: a flip-flop caught between 0 and 1 when its input changes at the wrong moment.
- Testbench: code that drives a design in simulation and checks its outputs.
What to study, in order
- Boolean algebra, gates, adders and multiplexers, by hand.
- Latches, flip-flops, counters and shift registers.
- A traffic-light or vending-machine state machine, drawn and then written in an HDL.
- Simulate it with a testbench and read the waveforms.
- Build a small CPU or UART, and find its critical path.