Electronic design automation is the software used to design circuits and boards: schematic capture, simulation, synthesis, layout, timing and verification. No modern chip could be designed by hand, so EDA is both a toolbox for engineers and a field of algorithms: graph partitioning, placement, routing, SAT solving.
Key concepts
- Abstraction levels: system, behavioural, RTL, gate, transistor and layout, with tools to move between them.
- Simulation: event-driven for digital logic, numerical for analog circuits.
- Synthesis: turning RTL into gates from a cell library, under timing and area goals.
- Physical design: floorplanning, placement and routing, which are hard optimisation problems.
- Formal tools: equivalence checking and model checking prove properties instead of sampling them.
Vocabulary
- Netlist: a circuit as components and the connections between them.
- SPICE: the standard family of analog circuit simulators, from which many tools descend.
- Constraint file: the timing and pin requirements the tools must meet.
- Design rules: the geometric limits the manufacturing process imposes on a layout.
What to study, in order
- Capture a small schematic and simulate it in a SPICE-style tool.
- Write and simulate Verilog or VHDL, and read the waveforms.
- Synthesise a design and read what the tool did to your code.
- Learn the algorithms behind placement and routing, and implement a maze router.
- Script a flow end to end with a build system so every step is repeatable.