Saltar al contenido ForoHackers

RF and microwave: start here

RF y microondas
#507 · Ophuscado · · Denunciar

RF and microwave engineering covers circuits and systems at radio frequencies, from megahertz to many gigahertz: radios, radar, satellite links, wireless chips. At these frequencies wires become transmission lines, and layout, matching and shielding matter as much as the schematic.

Key concepts

  • Transmission lines and impedance: a mismatch reflects power; 50 ohms is the usual standard.
  • S-parameters: how a network scatters power, measured with a vector network analyzer.
  • Matching and filtering: networks that move power into a load and reject unwanted frequencies.
  • Link budget: transmit power, antenna gains, path loss and receiver sensitivity, added in decibels.

Vocabulary

  • dB and dBm: ratios on a log scale, and power relative to one milliwatt.
  • VSWR: voltage standing wave ratio, a measure of mismatch.
  • Smith chart: a graph of impedance that makes matching a visual exercise.
  • Spectrum analyser: an instrument that shows signal power across frequency.

What to study, in order

  1. Complex numbers, impedance and the decibel.
  2. Transmission lines and reflection; simulate a mismatched line.
  3. The Smith chart, then match a simple load by hand and in a simulator.
  4. Build a link budget for a simple radio link and check it against a measurement.
  5. Learn the basics of RF safety and of the rules on who may transmit where.

Safety and rules

RF energy can heat tissue at high power, and high-power transmitters and some amplifiers also run on dangerous voltages. Keep antennas away from people, follow exposure guidance, and use dummy loads for bench tests. Transmitting is regulated: bands, power and licences differ by country, so check your own regulator before you radiate anything.

Related tags

#wireless #analog #amateur-radio #signal-processing

Inicia sesión o únete para responder.