Saltar al contenido ForoHackers

Signal processing: start here

Procesamiento de señales
#513 · Ophuscado · · Denunciar

Signal processing analyses and transforms signals: sound, images, radio, sensor readings, vibrations. It lets you filter noise, find a tone, compress data or recover a message. The central idea is that any signal can be seen both in time and in frequency, and each view makes some problems easy.

Key concepts

  • Sampling: capturing a continuous signal at discrete times; the sampling rate must be above twice the highest frequency, or aliasing occurs.
  • Linear time-invariant systems: described by an impulse response, and applied by convolution.
  • Fourier transform: the spectrum of a signal; the FFT computes it quickly.
  • Filters: FIR and IIR designs that keep wanted frequencies and reject others.
  • Windowing and estimation: leakage, resolution and noise in real spectra.

Vocabulary

  • Nyquist rate: twice the highest frequency present, the minimum safe sampling rate.
  • Aliasing: a high frequency appearing as a false low one after sampling.
  • Convolution: the operation that applies a filter to a signal.
  • SNR: signal-to-noise ratio, usually in decibels.

What to study, in order

  1. Sines, complex exponentials and the idea of frequency.
  2. Sample a tone in code and see aliasing by lowering the rate.
  3. Implement a discrete Fourier transform, then use an FFT library and compare.
  4. Design and apply FIR and IIR filters to a noisy recording.
  5. Process a real signal end to end: audio, an accelerometer or a radio capture.

Related tags

#analog #rf #speech #computer-vision

Inicia sesión o únete para responder.