Retrocomputing is the hobby of collecting, restoring, programming and using older computers and consoles, from 8-bit home machines to early workstations. It is history you can touch: you learn how much a small CPU and a few kilobytes can do, how hardware and software were designed under tight limits, and how to keep ageing machines and media alive.
Key concepts
- Simple architectures: a CPU, a memory map and a few custom chips, small enough to understand whole.
- Restoration: clean, test the power supply, replace failing parts and inspect the board before the first power-on.
- Preservation: copy disks, tapes and ROMs into image files before the media decays.
- Programming under limits: BASIC and assembly, counting every byte and every cycle.
- Safety: old power supplies and CRT monitors can keep dangerous voltages after switch-off, and old capacitors can fail violently.
Vocabulary
- 8-bit: a class of home computers built around a CPU that handles data a byte at a time.
- ROM: read-only memory holding a machine's firmware or a cartridge's software.
- Recapping: replacing the aged electrolytic capacitors of a board.
- Cross-development: writing code for the old machine on a modern computer.
What to study, in order
- Pick one machine family and read its memory map and hardware manuals.
- Run an emulator of it and write a small BASIC program.
- Learn that CPU's assembly and write a program that draws on the screen or makes a sound.
- Restore a machine you own: inspect, clean, test the power supply on its own, then replace worn parts.
- Make images of your disks and tapes, and keep them with notes on what each holds.
Related tags
#emulation #assembly #computer-architecture #repair #history