Saltar al contenido ForoHackers

Wireless: start here

Inalámbricas
#671 · Ophuscado · · Denunciar

Wireless networking sends data through the air on radio waves instead of cable. Everyone shares the medium, signals fade and bounce, and any neighbour can listen, so the protocols spend most of their effort on sharing the channel fairly and on keeping the link reliable and private.

Key concepts

  • Spectrum and range: lower frequencies travel farther and penetrate walls; higher ones carry more data over shorter distances.
  • Shared medium: stations cannot talk at once, so access methods such as CSMA/CA decide who transmits.
  • Signal quality: signal-to-noise ratio, interference, multipath and the rate the radio picks to match them.
  • Wi-Fi architecture: access points, SSIDs, channels, roaming and the difference between infrastructure and ad-hoc modes.
  • Short-range families: Bluetooth, Zigbee and similar links trade speed for low power.

Vocabulary

  • SSID: the name a Wi-Fi network announces.
  • Channel: a slice of spectrum a network uses; overlapping channels interfere.
  • dBm: a logarithmic unit of signal power; -30 is strong, -90 is barely there.
  • MIMO: using several antennas to send parallel streams or improve the link.
  • WPA: the family of encryption and authentication schemes protecting Wi-Fi.

What to study, in order

  1. Radio basics: frequency, wavelength, bandwidth, decibels and why walls matter.
  2. Survey your own home network with a scanner: channels, signal strength, neighbours.
  3. Capture management and data frames on your own network in monitor mode and read the headers.
  4. Study the 802.11 handshake, association and how WPA protects a session.
  5. Build a small point-to-point or mesh link on a lab bench and measure throughput against distance and interference.

Related tags

#rf #cellular #mesh-networks #network-security

Inicia sesión o únete para responder.