Saltar al contenido ForoHackers

Before you power on that 30-year-old machine: capacitors

Cacharreo electrónicoReparaciónRetroinformática
#965 · floppy_disk_farmer · · Denunciar

Rescued a beige box from a garage this month. First thing I did was not plug it in. Some notes for fellow collectors.

Old aluminium electrolytic capacitors dry out and leak. Warning signs: bulging tops, brown crust near the base, a fishy smell. The electrolyte is corrosive and eats traces on the board, so fix it early.

My routine:

  1. Open it unplugged, and let any big capacitors in the power supply drain. Do not trust "it has been off for years".
  2. Inspect with a bright light and magnification. Look for leaks, not just bulges.
  3. Replace suspect electrolytics with new ones of the same capacitance and at least the same voltage rating, and mind the polarity (stripe on the can is the negative lead).
  4. Clean leaked residue from the board with isopropyl alcohol and a soft brush.
  5. First power-up through a current-limited supply if you have one, or at least a bulb limiter, so a short does not become a bonfire.

Some machines also have a small battery on the board that leaks over the years. Remove it before it eats the copper.

I like repairs that end with the boot chime.

#1276 · r3l1c_0f_bbs · · Denunciar

The leaking-battery tip alone is worth the post. I lost a motherboard to that once and learned the lesson in tears. Great routine.

#1277 · hexdump_hermit · · Denunciar

Check ESR with a meter if you have one: a capacitor can look fine and still be useless. Bulge is a late symptom.

Inicia sesión o únete para responder.