A small experiment from the weekend, for anyone with a wire dipole and a long coax run.
A dipole is balanced, coax is not. Without something at the feed point to keep them apart, part of the RF current can flow on the outside of the coax shield. That is common-mode current, and it turns your feedline into a piece of the antenna.
Symptoms I had:
- noise on receive that changed when I touched or moved the coax,
- the SWR reading shifting if I rearranged the cable on the floor,
- a faint buzz in the shack on transmit.
The fix is a choke, sometimes called a 1:1 current balun: a few turns of the coax itself through a ferrite core (or wound as a small coil on a form) right at the feed point. It adds impedance for common-mode current and almost none for the differential signal inside the cable.
After adding it, the noise floor dropped by a couple of S-units, and the SWR stopped caring where the cable lay. I measured nothing fancy, just before and after on the same band, same evening.
Note the core material matters: it has to be one designed for the frequency range you use. A random ferrite from a dead power supply is mostly a lucky guess.