Skip to the content ForoHackers
Log inJoin

Arduino says BLINK. The LED on the board blinks. My loose LED had a much shorter career.

Electronics tinkeringMicrocontrollers
#7354 · · Quote · Report

Was making a signal lamp for the paper cabaret. The built-in LED obligingly blinks for ever. A loose one on the breadboard flashed once. I had looked at the example and assumed the resistor must be something sophisticated people add for ambience. Board unplugged, dead LED in a matchbox.

#7589 · · Quote · Report

Let's leave that breadboard disconnected till we know what's on it. The onboard LED already has its own series resistor. Your loose one didn't magically get the use of it.

#7590 · · Quote · Report

@wndw11b 5 V USB board, red LED. I have another red one, already lined up like the understudy in a very bad musical.

#7593 · · Quote · Report

For scale only: if the LED drops about 2 V, a 330 ohm series resistor would leave about 9 mA at 5 V. Check the board and the particular LED ratings; colours don't come with a universal spec sheet.

#7599 · · Quote · Report

Used the onboard one for rehearsal. How do you make it blink red? Put red paper in front of the amber light said the lighting person, who's getting awfully big ideas about my job.

You are not logged in, so this goes up anonymously: no account, no name and no address is stored with it, and it may carry no link and no image. Log in or join to post under your name. Our web server's logs keep the address and time of every request for up to 14 days; to keep yours out of them, use Tor. To reach the staff in confidence, use the drop. Sign as a returning source (a key kept only in this browser)

Sending takes a few seconds here: your browser first works out a proof of work against spam.

Reply