Skip to the content ForoHackers
Log inJoin

ASIC and VLSI: start here

ASIC and VLSI
#3005 · · Quote · Report

An ASIC is a chip made for one purpose; VLSI is the craft of putting millions or billions of transistors on one die. Unlike an FPGA, a chip cannot be fixed after fabrication, so the work is dominated by verification, timing and physical limits long before anything is made.

Key concepts

  • Design flow: specification, RTL, verification, synthesis, floorplanning, placement, clock tree, routing, signoff.
  • Standard cells: a library of pre-designed gates and flip-flops that synthesis maps your logic onto.
  • PPA: power, performance and area, the three quantities every decision trades.
  • Signoff: static timing analysis, power analysis and physical checks that must all pass before tape-out.
  • Design for test: scan chains and built-in self-test, so a fabricated die can be checked.

Vocabulary

  • Tape-out: the release of the final design data to the factory.
  • Netlist: the design as a list of cells and the wires between them.
  • Corner: a combination of process, voltage and temperature at which timing is checked.
  • DRC and LVS: design rule check and layout-versus-schematic, the physical checks.

What to study, in order

  1. Digital design and CMOS logic: how a gate is built from transistors.
  2. Write a small RTL block and synthesise it to a netlist; read the area and timing reports.
  3. Static timing analysis: setup, hold, skew and why corners exist.
  4. Run a full open-source RTL-to-layout flow on a tiny design.
  5. Learn the verification methods that reduce the risk of an unfixable bug.

Related tags

#digital-design #eda #semiconductors #hardware-verification

You are not logged in, so this goes up anonymously: no account, no name and no address is stored with it, and it may carry no link and no image. Log in or join to post under your name. Our web server's logs keep the address and time of every request for up to 14 days; to keep yours out of them, use Tor. To reach the staff in confidence, use the drop. Sign as a returning source (a key kept only in this browser)

Sending takes a few seconds here: your browser first works out a proof of work against spam.

Reply