Control theory is how to make a system behave as you want by measuring it and adjusting its input: a thermostat, a cruise control, a drone holding level. Feedback makes a system accurate despite disturbances, and can also make it oscillate or blow up, so stability is the first thing to prove.
Key concepts
- Feedback loop: compare the measurement with the target, and act on the error.
- PID control: proportional, integral and derivative terms, the workhorse of industry.
- Stability: whether the system settles; poles, gain and phase margins tell you how safely.
- Models: transfer functions or state-space equations that predict how the plant responds.
- State feedback and observers: estimating internal states you cannot measure and controlling them.
Vocabulary
- Plant: the system being controlled.
- Setpoint: the target value.
- Overshoot and settling time: how far the response exceeds the target and how long it takes to settle.
- Integrator windup: the integral term growing while the actuator is saturated.
What to study, in order
- Differential equations and the Laplace transform, enough to model a motor or a tank.
- Simulate step responses of first and second order systems.
- Tune a PID controller on a simulated plant, then on a real motor or heater.
- Frequency response, Bode plots and stability margins.
- State-space design, an observer and a discrete-time implementation with sampling effects.
Related tags
#robotics #mechatronics #signal-processing #industrial-automation