Skip to the content ForoHackers
Log inJoin

Electronic design automation: start here

Electronic design automation
#501 · Ophuscado · · Report

Electronic design automation is the software used to design circuits and boards: schematic capture, simulation, synthesis, layout, timing and verification. No modern chip could be designed by hand, so EDA is both a toolbox for engineers and a field of algorithms: graph partitioning, placement, routing, SAT solving.

Key concepts

  • Abstraction levels: system, behavioural, RTL, gate, transistor and layout, with tools to move between them.
  • Simulation: event-driven for digital logic, numerical for analog circuits.
  • Synthesis: turning RTL into gates from a cell library, under timing and area goals.
  • Physical design: floorplanning, placement and routing, which are hard optimisation problems.
  • Formal tools: equivalence checking and model checking prove properties instead of sampling them.

Vocabulary

  • Netlist: a circuit as components and the connections between them.
  • SPICE: the standard family of analog circuit simulators, from which many tools descend.
  • Constraint file: the timing and pin requirements the tools must meet.
  • Design rules: the geometric limits the manufacturing process imposes on a layout.

What to study, in order

  1. Capture a small schematic and simulate it in a SPICE-style tool.
  2. Write and simulate Verilog or VHDL, and read the waveforms.
  3. Synthesise a design and read what the tool did to your code.
  4. Learn the algorithms behind placement and routing, and implement a maze router.
  5. Script a flow end to end with a build system so every step is repeatable.

Related tags

#digital-design #asic #pcb #formal-methods

Log in or join to reply.