Semiconductors are materials, mostly silicon, whose conductivity can be controlled by doping and by electric fields. That control makes diodes, transistors and every integrated circuit possible. The field joins solid-state physics, device design and the fabrication processes that print billions of devices on a wafer.
Key concepts
- Band structure and doping: adding impurities makes n-type or p-type material, with free electrons or holes.
- The p-n junction: the basis of diodes, solar cells, LEDs and transistors.
- MOSFET operation: a gate voltage opens or closes a channel between source and drain.
- Fabrication: lithography, deposition, etching and doping, repeated layer by layer.
- Scaling and limits: smaller devices switch faster but leak more and run into heat and variability.
Vocabulary
- Wafer: the thin disc of semiconductor on which many chips are made together.
- Yield: the fraction of fabricated chips that work.
- Threshold voltage: the gate voltage at which a transistor starts to conduct.
- Process node: a generation of manufacturing technology, a label more than a measurement.
What to study, in order
- Basic atomic and band theory, up to what makes silicon a semiconductor.
- The p-n diode: its current-voltage curve, derived and then measured on a real diode.
- The MOS capacitor and MOSFET, with a simulation of their curves.
- Follow the steps of a simple CMOS process from bare wafer to finished chip.
- Read about the materials used beyond silicon and why they suit power, light or radio.