A modem in the days of dial-up had two modes: command mode (it listens to you: ATDT, ATH) and data mode (everything you type is sent down the line). So how do you get back to command mode without dropping the call?
The answer was +++: three plus signs, typed on their own. The modem switches to command mode, and replies OK. You can then hang up with ATH, or change a setting, or go back to the call with ATO.
The clever part is the guard time. The modem only treats +++ as the escape if there is silence before it and silence after it, by default one second (register S12, in fiftieths of a second, default 50). Why? Because a file you are sending might contain the bytes +++ by accident, and you do not want your download to suddenly switch the modem into command mode. A second of silence in the middle of a data stream almost never happens by accident.
The escape character itself was configurable (register S2, default 43, the ASCII code of +), for people whose data was full of plus signs.
It is a lovely small example of a problem we still have: in-band signalling. When commands and data share the same channel, you need a convention to tell them apart. Here the convention was silence. Elsewhere it is escaping, length prefixes, or separate channels.