Someone at the radio club said their coax is 50 ohms; telly coax says 75. I measured one end of the centre conductor to the other. Barely anything. Which of the three of us is holding the wrong end of this conversation?
You're measuring the DC resistance along the wire. Characteristic impedance is the travelling wave's voltage/current ratio. You can own a very short piece of 75-ohm cable without owning a 75-ohm resistor.
If a wave on an ideal 50-ohm line reaches a 75-ohm resistive load, the voltage reflection coefficient is (75−50)/(75+50), or 0.2. Different question from what your two meter probes asked.