Saltar al contenido ForoHackers

ASIC and VLSI: start here

ASIC y VLSI
#3005 · · Citar · Denunciar

An ASIC is a chip made for one purpose; VLSI is the craft of putting millions or billions of transistors on one die. Unlike an FPGA, a chip cannot be fixed after fabrication, so the work is dominated by verification, timing and physical limits long before anything is made.

Key concepts

  • Design flow: specification, RTL, verification, synthesis, floorplanning, placement, clock tree, routing, signoff.
  • Standard cells: a library of pre-designed gates and flip-flops that synthesis maps your logic onto.
  • PPA: power, performance and area, the three quantities every decision trades.
  • Signoff: static timing analysis, power analysis and physical checks that must all pass before tape-out.
  • Design for test: scan chains and built-in self-test, so a fabricated die can be checked.

Vocabulary

  • Tape-out: the release of the final design data to the factory.
  • Netlist: the design as a list of cells and the wires between them.
  • Corner: a combination of process, voltage and temperature at which timing is checked.
  • DRC and LVS: design rule check and layout-versus-schematic, the physical checks.

What to study, in order

  1. Digital design and CMOS logic: how a gate is built from transistors.
  2. Write a small RTL block and synthesise it to a netlist; read the area and timing reports.
  3. Static timing analysis: setup, hold, skew and why corners exist.
  4. Run a full open-source RTL-to-layout flow on a tiny design.
  5. Learn the verification methods that reduce the risk of an unfixable bug.

Related tags

#digital-design #eda #semiconductors #hardware-verification

No has iniciado sesión, así que esto se publica como anónimo: no se guarda con ello ninguna cuenta, nombre ni dirección, y no puede llevar enlaces ni imágenes. Inicia sesión o únete para publicar con tu nombre. Los registros de nuestro servidor web guardan la dirección y la hora de cada petición hasta 14 días; para que la tuya no quede en ellos, usa Tor. Para escribir al equipo de forma confidencial, usa el buzón. Firmar como fuente habitual (una clave guardada solo en este navegador)

Enviar tarda unos segundos aquí: tu navegador resuelve antes una prueba de trabajo contra el spam.

Responder