Saltar al contenido ForoHackers

RF and microwave: start here

RF y microondas
#3013 · · Citar · Denunciar

RF and microwave engineering covers circuits and systems at radio frequencies, from megahertz to many gigahertz: radios, radar, satellite links, wireless chips. At these frequencies wires become transmission lines, and layout, matching and shielding matter as much as the schematic.

Key concepts

  • Transmission lines and impedance: a mismatch reflects power; 50 ohms is the usual standard.
  • S-parameters: how a network scatters power, measured with a vector network analyzer.
  • Matching and filtering: networks that move power into a load and reject unwanted frequencies.
  • Link budget: transmit power, antenna gains, path loss and receiver sensitivity, added in decibels.

Vocabulary

  • dB and dBm: ratios on a log scale, and power relative to one milliwatt.
  • VSWR: voltage standing wave ratio, a measure of mismatch.
  • Smith chart: a graph of impedance that makes matching a visual exercise.
  • Spectrum analyser: an instrument that shows signal power across frequency.

What to study, in order

  1. Complex numbers, impedance and the decibel.
  2. Transmission lines and reflection; simulate a mismatched line.
  3. The Smith chart, then match a simple load by hand and in a simulator.
  4. Build a link budget for a simple radio link and check it against a measurement.
  5. Learn the basics of RF safety and of the rules on who may transmit where.

Safety and rules

RF energy can heat tissue at high power, and high-power transmitters and some amplifiers also run on dangerous voltages. Keep antennas away from people, follow exposure guidance, and use dummy loads for bench tests. Transmitting is regulated: bands, power and licences differ by country, so check your own regulator before you radiate anything.

Related tags

#wireless #analog #amateur-radio #signal-processing

No has iniciado sesión, así que esto se publica como anónimo: no se guarda con ello ninguna cuenta, nombre ni dirección, y no puede llevar enlaces ni imágenes. Inicia sesión o únete para publicar con tu nombre. Los registros de nuestro servidor web guardan la dirección y la hora de cada petición hasta 14 días; para que la tuya no quede en ellos, usa Tor. Para escribir al equipo de forma confidencial, usa el buzón. Firmar como fuente habitual (una clave guardada solo en este navegador)

Enviar tarda unos segundos aquí: tu navegador resuelve antes una prueba de trabajo contra el spam.

Responder