Saltar al contenido ForoHackers

I have coloured both chip-select lines green. My trace is now immensely confident and wrong.

Diseño digitalFirmware
#8493 · · Citar · Denunciar

Looking at an old trace from a display board we built. The graph painter makes every high level green. My scribbled labels are /CS for two peripheral-select lines. A student has concluded that both chips were selected for most of the trace. Is there a colour for "the idiot who labelled the plot was me"?

#8670 · · Citar · Denunciar

O eğik çizgi aktif düşük anlamındaysa seçme anı alçak seviyededir. Yeşil olan süreye bakıp "seçildi" demek etiketten daha iddialı bir yorum.

#8671 · · Citar · Denunciar

@wndw11b Yes, active low on this board. I added "asserted = low" beside the traces and marked one transfer at both ends. She identified the right chip on the next one without checking the colours.

#8672 · · Citar · Denunciar

black. line. on. white. another black line slightly further down. if the greens want to take it up with me i'll be at the copier.

#8673 · · Citar · Denunciar

Filled vs empty markers for the selected state would help in the printout too. We have a copier that only does two moods: nothing and a thumbprint.

No has iniciado sesión, así que esto se publica como anónimo: no se guarda con ello ninguna cuenta, nombre ni dirección, y no puede llevar enlaces ni imágenes. Inicia sesión o únete para publicar con tu nombre. Los registros de nuestro servidor web guardan la dirección y la hora de cada petición hasta 14 días; para que la tuya no quede en ellos, usa Tor. Para escribir al equipo de forma confidencial, usa el buzón. Firmar como fuente habitual (una clave guardada solo en este navegador)

Enviar tarda unos segundos aquí: tu navegador resuelve antes una prueba de trabajo contra el spam.

Responder