Saltar al contenido ForoHackers

floppy_disk_farmer

Se unió el 13 noviembre 2023

Mensajes en el foro

  1. Respondió en What 'test your restores' actually means: a checklist

    Adding step 7 for the vintage crowd: can you still *read* the medium? Having the tape or the disk is not the same as having a drive that works.

  2. Respondió en Linear tape forces good habits: what a tape drive taught me about backups

    The catalogue point is the one people forget. I have boxes of floppies with labels like "STUFF 3". I have no idea what STUFF is. Do not be me.

  3. Respondió en Finding a dead short on a board: voltage injection and a steady hand

    Same procedure for vintage boards, and the culprit is the same. Old tantalum capacitors also short, and those can go from "fine" to "bang" when you power them, so use the current limit and keep your …

  4. Respondió en Milling my own PCBs on a hobby CNC: chip load, and why 0.1 mm bits snap

    The height-map step is the one nobody wants to do and everybody needs. I do the same when milling front panels. Also, the vacuum saves your lungs and your electronics, fibreglass dust gets in everyth…

  5. Respondió en Reprinting a snapped plastic gear for an old drive, and what material survives

    Good point on shrinkage. I did not anneal, because the tolerances are already tight. If this one fails I will try nylon with a heated enclosure and pray.

  6. Inició Reprinting a snapped plastic gear for an old drive, and what material survives

    A drive I am restoring has a plastic gear in the eject mechanism that snapped at the hub, as they all eventually do. No spare parts exist, so I measured it with calipers and modelled it in CAD. Notes…

  7. Respondió en RAID0 for speed: a short post-mortem, with arithmetic

    Sorry about the photos. If the dead drive is still detected at all, stop powering it on repeatedly and make a sector-level image of it with something that tolerates read errors (`ddrescue` is the one…

  8. Respondió en Cold joints: how to tell and how to stop making them

    Cracked joints on old boards: the big heavy parts (transformers, connectors) are where I find them first. They get shaken and heated for thirty years. I reflow those even if they look fine.

  9. Respondió en End-to-end checksums: the disk's ECC does not cover the whole path

    I have seen this with an old SCSI cable that was just slightly off. Every file copied fine, every checksum I took later disagreed. The disk was blameless. The cable got a funeral.

  10. Respondió en Why tape drives hate slow computers: the shoe-shine effect

    Same logic with floppies, except the oldest disks fail for you without being asked. Store them upright, away from speakers and from that one fridge magnet you swear is harmless.

  11. Respondió en A restore drill that takes thirty minutes (and what it finds)

    Same idea for old media. A tape or disk that you have not read in two years is a theory, not a backup. I read a sample from each box once a year, mostly to find out which ones have started to go.

  12. Respondió en Where the files live on a 1.44 MB floppy (FAT12 walkthrough)

    Yes, and that is why recovering `?ELLO.TXT` always feels like detective work. You guess the first letter from context.

  13. Inició Where the files live on a 1.44 MB floppy (FAT12 walkthrough)

    I recover disks as a hobby, so I end up looking at hex a lot. A 3.5" 1.44 MB floppy formatted with FAT12 has a simple layout of 2880 sectors of 512 bytes: | Region | Sectors | What | |---|---|---| |…

  14. Inició Before you power on that 30-year-old machine: capacitors

    Rescued a beige box from a garage this month. First thing I did was **not** plug it in. Some notes for fellow collectors. Old aluminium electrolytic capacitors dry out and leak. Warning signs: bulgi…